- 8 -
OPERATION AND USE
It is recommended to remove the
battery from the vehicle. With the
machine disconnected from the power
supply, connect the positive red clamp
(+) to the positive terminal of the battery
and connect the negative black clamp
(-) to the negative/earth terminal of the
battery.
CONNECTING (FIG.1.):
Connect the battery charger to the
power supply, and press switch
(A)
into
the '
I
- ON' position.
The display
(B)
will show the battery
voltage e.g. U07 would be 7 volts. It will
then display the charge current e.g. A05
would be 5 amps.
If the battery charger has been
connected with the polarity reversed,
i.e. positive to negative, negative to
positive, the display will read noP.
BATTERY TYPE SELECTION (FIG.2.):
With the unit switched 'On' press button
(C)
to cycle through the indicator
LED's
(D)
and select the appropriate
charging mode for the battery type.
Press button
(E)
to cycle through the
indicator LED's
(F)
and select the
appropriate voltage for the battery type.
Fig.1.
(A)
(B)
Fig.2.
(F)
(D)
(C)
(E)
