
– 5 –
4. INTRODUCTION
4.1 SCOPE
For detail and finishing work such as sanding, cutting, scraping, etc.
This product is intended for domestic and infrequent light trade use only. Any application other
than that it was intended for, is considered misuse.
4.2 SPECIFICATION
Stock no. .................................................................................................................................. 78429
Part no. .................................................................................................................................MT400D
Motor:
Rated voltage ....................................................................................................................230V~
Rated frequency ................................................................................................................. 50Hz
Rated input ........................................................................................................................ 300W
Revolutions per minute (no load) ....................................6-speed variable, 15,000-22,000o/min
Oscillating angle .............................................................................................................................. 3˚
Sound pressure level (LpA)* ................................................................................................. 81dB(A)
Sound power level (LWA)** .................................................................................................. 92dB(A)
Vibration level ...................................................................................................................... 2.55m/s²
Weight (machine only) .............................................................................................................1.35kg
*
Continuous A-Weighted Sound Pressure Level at the workstation in accordance to
and declared according to latest directive.
** The typical A-Weighted noise level determined to latest directive.
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product.
• Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
• Exposure to damp air can gradually corrode components.
• If the product is unprotected from dust and debris, components will become clogged.
• If not cleaned and maintained correctly or regularly, the machine will not perform at its best.