DA50/190 Shown.
GETTING TO KNOW YOUR
COMPRESSOR
(1)
Air Receiver Tank
(2)
Sump Bung
(3)
Pump Unit
(4)
Dipstick/Oil Inlet
(5)
Air Filter
(6)
Motor
(7)
Overload Protection
(8)
Safety Valve
(9)
ON/OFF Switch
(10)
Air Tap
(11)
In-Line Pressure Gauge
(12)
Tank Pressure Gauge
(13)
Tank Bung
(14)
Tank Rating Plate
(15)
Pressure Regulator
MAINTENANCE
It is advisable to clean all the finned parts of
your compressor, so as to keep the cooling
system efficient and to ensure a long work
life to your machine.
OPERATIONS TO BE CARRIED OUT
EVERY 2 YEARS:
Check the non-return valve and if necessary
replace the seal.
Check intake and delivery valves on valve
plates.
Recommended Oils:
Recommended oils with ISO 100 viscosity for
compressors, in accordance with DIN51506-
VDL 100-E Standards and ISO6521:L-DAC
Specifications (suitable for room temperature
ranging from +6°C and +25°C).
AGIP
DICREA100
API
CM-8X
BP
ENERGOL CS100
CASTROL
AIRCOL PD100
ESSO
EXX OLUB H150
IP
CALATIA OIL ISO 100
MOBIL
RARUS 427
FINA
EOLAN AC 100
SHELL
COREMA OIL H100
TOTAL
CORTUSA 100
Use oils with an ISO 46/68 viscosity for a
room temperature ranging from 0°C to + 5°C
Use oils with an ISO 150 viscosity for a room
temperature ranging from + 26°C to + 45°C.
- 5 -
- 10 -
UNPACKING:
After removing the packing material, make sure the product is in perfect condition
and that there are no visible damaged parts. If in doubt, do not use the compressor and contact the
dealer from whom it was purchased.
The packaging materials (plastic bags, polystyrene etc.,) must be disposed of in an appropriate
refuse collection container. These materials must not be left within the reach of children as they are
potential sources of danger.
(1)
(14)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(15)
(10)
(13)
(11)
(12)
