8. OPERATION AND USE
8.2 CHARGING BATTERY - FIG 3
With a battery removed from vehicle:
1.
Connect the RED positive charger
lead
to the positive (+) terminal
on your battery.
2.
Connect the BLACK negative charger
lead
to the negative (–) terminal
on your battery.
3.
Plug in the mains power lead and
press the mode button
toggle
through the three screens until the
correct charge is selected.
Charging will now commence.
Note:
Refer to the section titled “charging
times” to determine the correct
charging time for your battery/charger
combination.
With a battery connected to vehicle:
Note:
All loads in the vehicle must be
switched off during charging.
1.
Connect the RED positive charger
lead
to the positive (+) terminal
on your battery.
2.
Connect the BLACK negative charger lead
to your vehicles ground connection
on either the engine or chassis, away from any fuel lines or the battery vents.
3.
Plug in the mains power lead and press the mode button
toggle through the
three screens until the correct charge is selected.
Charging will now commence.
Note:
Refer to the section titled “charging times” to determine the correct charging time for
your battery/charger combination.
- 12 -
FIG.3
3 SCREENS / MODES
Winter mode:
Winter mode should only be used as a “booster charge” and not as a standard charge cycle.
Winter mode puts a higher voltage into your battery to quickly “boost” your batteries charge to
start the engine.
Important:
After an extended period of charging the back of this machine can become warm.
This machine must be used on a non flammable surface.