8. ASSEMBLING THE LAWN MOWER
8. ASSEMBLING THE LAWN MOWER
- 14 -
- 15 -
8.3
MOUNTING AND DISMOUNTING THE
GRASS BAG (FIGS 5 & 6)
To fit: Raise the rear cover and hitch the grass bag on rear of
mower.
Lower the sprung plastic rear flap to secure the grass bag in
position.
8.5
HEIGHT OF CUT (FIG.8)
Apply outward pressure to disengage lever from rack. Move
lever forward or back to adjust height.
There are 5 cutting heights to select and they range from 25 -
75mm.
8.6
MOUNTING AND DISMOUNTING
MULCHING WEDGE AND DISCHARGE
GUIDE
This lawn mower can be retrofitted from its normal function,
based on the application purpose:
1. Lawn mower with rear discharge to (
Fig.9
):
2. Mulching mower or as (
Fig.10
).
3. Side-discharge mower (
Fig.11
).
8.7
WHAT IS MULCHING?
When mulching, the grass is cut in one working step, then
finely chopped and returned to the grass strip as natural
fertilizer.
Hints for mulch-mowing:
- Regular cut-back by max. 2cm from 6cm to 4cm grass
high.
- Use a sharp blade, a blunt blade will tear not cut.
- Do not mow wet grass - Set max. Motor speed.
- Only move at working pace.
- Regularly clean mulching wedge, housing inner side
and mowing blade.
8.4
STARTER HANDLE SUPPORT (FIG.7)
Feed the threaded section of the starter handle support
through the hole in the right upper handle and secure with nut
ensuring the loop is on the inside of the handle frame.
FIG.5
FIG.6
FIG.7
FIG.8
FIG.9
FIG.10
FIG.11
