Draper 54876 Скачать руководство пользователя страница 5

CONNECTING YOUR PUMP TO THE POWER SUPPLY: (230V ONLY)

To eliminate the possibility of an electric shock, your pump has been fitted with a BS
approved, non-rewirable moulded plug and cable which incorporates a fuse, the value
of which is 3 amps. Should the fuse need to be replaced, an 

approved BS1362 fuse

must be used of the same rating, marked thus        . The fuse cover is detachable, never
use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is
of the same colour as that visible on the pin face of the plug (i.e. red). Fuse covers are
available from your Draper Tools stockist.
If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the
cable should now be suitably prepared and the correct type of plug fitted. See below.

WARNING:

A plug with bare flexible wires exposed is hazardous if engaged in a live power socket
outlet.

WARNING: THIS APPLIANCE MUST BE EARTHED.

Green and Yellow - Earth, Blue - Neutral, Brown - Live.
As these colours may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal in the
plug which is marked with the letter ‘E’ or by the earth symbol 

or coloured green

or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked
with the letter ‘N’ or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which is marked
with the letter ‘L’ or coloured red or brown.

EXTENSION LEAD CHART:
Extension lead sizes shown assure a voltage drop of not more than 5% at rated
load of tool.

POWER SUPPLY

- 5 -

Ampere rating

3

6

10

13

(on name plate)

Extension cable length

7.5

0.75

0.75

1.0

1.25

15m

0.75

0.75

1.0

1.5

22.5m

0.75

0.75

1.0

1.5

30m

0.75

0.75

1.25

1.5

45m

0.75

1.25

1.5

2.5

Wire size mm

2

IMPORTANT: A residual current circuit breaker (RCD) must be used when pumping from
ponds or swimming pools and is recommended for all applications.

Содержание 54876













Отзывы: