4. INTRODUCTION
4.1 SCOPE
This dust extractor is intended for non-commercial or occasional extraction from stationary
woodworking machines. It is not intended to be adapted to extract from hand held power tools in
the workplace as Health and Safety guidance recommends use of a “Class M” extractor when
using handheld tools. It is not intended to replace Personal Protective Equipment and Draper
always recommend the use of a suitable dust mask when using tools which generate dust or
airborne particles. This machine must not be used to extract metallic debris, glass or water.
4.2 SPECIFICATION
Stock no. ......................................................................................................................... 54253
Part no. ....................................................................................................................... DE1050B
Rated voltage ........................................................................................................... 230V/50Hz
Rated input ..................................................................................................................... 1100W
Air flow .......................................................................................................................... 3m
3
/min
Filtration (dia.) .............................................................................................................. 5 micron
Intake diameter .............................................................................................................. 100mm
Bag dimensions .......................................................................................... 230(D) x 360(H)mm
Weight ............................................................................................................................... 11kg
ALWAYS WEAR AN APPROVED DUST MASK AND GOGGLES.
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in
personal injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
NOTE: Remove plug from the socket before carrying
out adjustment, servicing or maintenance.
Remove hose, adjustable retaining clips (x2) and
adaptor from the collection bin.
8.1 FIX HOSE TO COLLECTION TANK
- FIGS. 1 - 2
Place retaining clip over hose. Attach the same end of
the hose over dust inlet hole.
Tighten with a flat head screwdriver.
8.2 FIX MOTOR TO COLLECTION TANK -
FIG. 3
Place extractor lid/motor housing onto bin, positioning
the on/off switch to the front.
NOTE: Lid securing strap
(9)
must be fitted at all
times, except during maintenance.
8. PREPARING THE DUST EXTRACTOR
(4)
(11)
- 12 -
- 5 -
(9)
FIG.1
FIG.2
FIG.3
