●
It is advisable to lubricate the needle with oil at the beginning of the working day. The operation is quite simple and it
increases its durability and working order.
●
Never remove nozzle with universal pliers, only use the hexagonal spanner, take care not to damage the nozzle.
●
The ideal working pressure is stated in the above specification table. It can vary though, according to the density of the paint.
Maximum operating pressure 85psi.
Connect the painting cup complete with material. Before operating ensure the air pressure and material to be sprayed is suitable
for this product. Do not connect air hose until you are absolutely ready to begin work.
●
The paint quantity can be adjusted by the needle and by screwing and unscrewing the regulator. The spray pattern is
adjustable from round to fan by unscrewing the screw. For the fan pattern the required air pressure has to be higher than the
round one.
●
Hold the gun at a right angle to the working surface and move it parallel.
●
Keep the gun from the working surface about 15-30cm (6-12 inch) depending on the material, etc.
●
Start the stroke before squeezing trigger and release it just after
ending the stroke.
●
Always keep the material deposited even and wet.
●
Operate at the correct air pressure for a fine finish and safe
performance.
Never exceed the maximum operating
pressure.
WARNING WHEN SPRAYING
●
Do not spray in enclosed areas and maintain good ventilation.
●
Never spray close to or in the proximity of a naked flame.
●
Always use suitable skin and eye protection.
●
Wear an appropriate face mask.
5 PIECE AIR TOOL KIT
■
STOCK No.57592.
■
PART No.4314K.
05/99
•INSTRUCTIONS•
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
CONTENTS/SPECIFICATION
SPRAY GUN
15-30cm
CORRECT
INCORRECT
All fittings are
1
⁄
4
" BSP Air Inlet.
SPRAY GUN:
Operating air pressure ........................................45-60psi.
Maximum operating pressure ..................................85psi.
Cup capacity ............................................................1 litre.
PARAFFIN/WASHING GUN:
Operating air pressure ......................................40-110psi.
Maximum operating pressure ................................120psi.
Cup capacity ............................................................1 litre.
INFLATOR:
Operating air preesure ........................................0-110psi.
Maximum operating pressure ................................120psi.
BLOW GUN:
Maximum operating pressure ................................120psi.
ACCESSORIES:
Recoil Air Hose,
1
⁄
4
" BSP threaded connectors.
Maximum operating pressure ................................170psi.
This air tool kit is manufactured from quality materials and carefully checked by the manufacturer before its despatch. To get the
best from this quality product read the following instructions carefully before operating your air tools.
