Draper 34023, Руководство пользователя

Страница: 8 / 24

5. HEALTH AND SAFETY INFORMATION
before making any adjustments, carrying out maintenance operations or just finishing using the
tool.
Remove and check setting tools. Some machinery requires the use of additional tools or keys to
set, load or adjust the power tool. Before starting the power tool always check to make certain they
have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make sure
the switch is in the OFF position. If the machine is portable, do not hold the machine near the
switch and take care when putting the machine down, that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension
leads. If the tool is designed for use outdoors, use an extension lead also suitable for that
environment. When using an extended lead, select one capable of handling the current (amps)
drawn by the machine in use. Fully extend the lead regardless of the distance between the power
supply and the tool. Excess current (amps) and a coiled extension lead will both cause the cable to
heat up and can result in fire.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power
tool if you are under the influence of drugs (prescription or otherwise), including alcohol or if you
are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to conform to the relevant
international and local standards and as such should be maintained and repaired by someone
qualified, using only original parts supplied by the manufacturer. This will ensure the tool remains
safe to use.
5.2 ADDITIONAL SAFETY INSTRUCTIONS FOR BENCH DRILLS
Mechanical hazards:
Crushing. When setting/changing a tool or maintaining the machine avoid crushing injuries
sustained between fixed and moving elements of the machine.
Cutting or severing. At all times the workpiece shall be clamped as manual support will lead to
injury.
Entanglement. Switch off the machine for maintenance, workpiece loading/unloading, swarf/chip
removal, cutting/lubrication fluid application as contact with rotating spindle or tool will cause
entanglement and possibly lead to injury and entrapment.
Impact. Ensure the workpiece is securely clamped at all times to avoid sudden movement
(rotation) or ejection causing injury. Ensure any special tools associated with tool exchange, i.e.
chuck key are removed prior to attempting to start the machine.
Stabbing, cutting or puncture wounds. Take care when handling the tools and avoid contact
with swarf and burrs created during drilling as they are extremely sharp.
Electrical hazards:
Contact with live parts. During commissioning, maintenance and trouble shooting operations do
not remove, open or expose any electrical, terminal and control boxes due to the danger of
electrocution. If the main cable is damaged, unplug the machine immediately and have the cable
replaced before continuing.
Audible hazards:
Hearing loss. Wear ear defenders during operation to avoid damage to hearing, however ensure
this does not interfere with speech communications or audible warnings.
Material hazards:
Contact and inhalation. Wear personal protective equipment to avoid contact from harmful fluids,
gases or dust thrown or created during the drilling process.
Fire or explosion. Do not drill or drill in the vicinity of flammable or combustable materials.
– 8 –