manualshive.com logo in svg

Draper 33651, Руководство пользователя

Поделиться
Скачать
Draper 33651 Скачать руководство пользователя страница 7

– 7 –

5.  HEALTH AND SAFETY INFORMATION

Wait for the machine to stop. Unless the machine is fitted with a safety brake some parts may 

continue to move due to momentum. Wait for all parts to stop then disconnect it from the air line 

before making any adjustments, carrying out maintenance operations or just finishing using the tool.
Remove and check setting tools. Some machinery requires the use of additional tools or keys to 

set, load or adjust the power tool. Before starting the power tool always check to make certain they 

have been removed and are safely away from the machine.
Prevent unintentional starting. Before connecting any machine in to the air supply, make sure 

the switch is in the OFF position. If the machine is portable do not hold the machine near the 

switch and take care when putting the machine down that nothing can operate the switch.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a power 

tool if you are under the influence of drugs (prescription or otherwise), including alcohol or if you 

are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualified person. This tool is designed to confirm to the relevant 

international and local standards and as such should be maintained and repaired by someone 

qualified using only original parts supplied by the manufacturer. This will ensure the tool remains 

safe to use.

5.2 SPECIFIC SAFETY INSTRUCTION FOR MORTICER USE

There are certain risks linked to using any morticer, large or small, that have to be guarded 

against.  This manual will advise you on basic safety and how to operate your machine. 
Beware of contact hazards (cutting).  Take care when handling the work piece and parts of the 

morticer. Wear appropriate gloves to protect your hands and clear up after each operation. 
Beware of slip, trip and fall hazards.  The area closely surrounding the morticer, both on the bench 

and floor, must be kept clear, clean and tidy.
Beware of fire and explosion.  Do not operate this morticer in or around flammable materials.  This 

machine is not designed for use in hazardous environments.

Содержание 33651

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды