Draper 32319, Инструкция по эксплуатации

Страница: 20 / 24

4. INTRODUCTION
- 20 -
10.5 CLEANING AND MAINTENANCE OVERVIEW
Prior to every start.
Every 10 operating hours (more frequently in dusty conditions).
Every 10/15 operating hours.
Every 50 operating hours. (more frequently for reduced engine performance).
1. Check/clean/replace air filter element.
2. Check the pull starter for damage to the
starter .
3. Checking threaded connections for
tightness.
4. Remove dirt and debris from the
machine’s exterior
5. Inspect engine cooling fins for
accumulations of dirt and debris, clean as
necessary.
1. Check/clean/replace air filter element.
1. See section 10.1.
2. Visual inspection/testing.
3. Visual inspection/testing.
4. Visual inspection.
5. Visual inspection.
1. Check/clean/replace spark plug. 1. See section 10.2.
1. Inspect the entire machine and tubes for
damage, including loose or missing
components and repair as necessary.
2. Replace spark plug.
1. Visual inspection.
2. See section 10.2.
1. See section 10.1.
10.6 STORING THE MACHINE FOR AN EXTENDED PERIOD OF TIME
(3 MONTHS OR LONGER)
Before an extended period of disuse, you must remove the fuel from the machine.
– Drain the fuel tank, then start the engine and let it run until it stops of its own accord.
– Lubricate the blades moving surfaces and wipe clean with an oily cloth.