background image

INSTRUCTIONS

Stock No.16395 

Part No.MTC100

Manual Tyre Changer

DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF.  U.K.       drapertools.com        e-mail: [email protected]

DBKC0516

2. OPERATION

1. TECHNICAL 

DESCRIPTION

 Tyre 

bar 

x1

 Support plate 

x1

 Clevis pin 

x2

 Bolt M10x25 

x4

  Flat washer Ø10 

x4

  Lock washer Ø10 

x4

 Nut M10 

x4

 Long leg 

x1

 Short leg 

x1

 Pedestal 

x1

 Bead breaker 

x1

 Locking pin 

x2

 Force handle 

x1

 Slotted press plate 

x1

 Threaded cap 

x1

 Locating pin 

x1

  Bead breaker head 

x1

2.1. BREAKING THE BEAD - FIG. 1

• 

Remove all wheel weights and tyre valve core to release tyre pressure, lay the wheel flat on the base leg 

 in front of the bead breaker 

.

• 

Adjust bead breaker 

 (if required) and position the bead breaker head 

 between tyre wall and 

wheel rim, using the tyre lever 

 inserted into the force handle 

 and lever down to break the bead. 

Repeat around the wheel until bead is free from wheel rim, then turn the wheel over and repeat the 
process until the tyre is free from both beads.

2.2. TYRE REMOVAL - FIG. 2

• 

Lubricate both tyre beads with appropriate tyre soap.

• 

Mount the wheel onto the support base (valve side up), ensure the locating pin 

 is through one of the 

wheel holes and lock down using the slotted press plate 

 and threaded cap 

.

• 

Place the flat end of the tyre lever 

 between the tyre bead and the wheel rim, while applying pressure 

to the tyre side wall, lever against the cap and rotate the tyre lever in a clockwise direction.

 

Repeat action on second bead.

2.3. FITTING - FIG. 3

• 

Lubricate both tyre beads.

• 

Using the tyre lever 

 foot end, locate between the lower bead and wheel rim, lever against the cap and 

rotate clockwise around the cap.

• 

Repeat action on second bead, then replace valve core, inflate tyre to ensure tyre locates correctly onto 
rim (DO NOT exceed maximum allowance tyre pressure) the set tyre pressure to require valve.

• 

We would recommend that wheel is correctly balanced before use.



FIG.2

FIG.1

FIG.3

NOTE: For safe and effective use of this tyre changer it MUST be securely bolted 
down to the floor using suitable fixings.

WARNING: 

Extreme caution must be used if 
attempting to replace tyres on 
alloy wheels.
This machine is designed to be 
used on steel wheels and Draper 
Tools Ltd accepts no responsibility 
for any damage to wheels or tyres.

Отзывы:

Похожие инструкции для 16395