Draper 10773 Скачать руководство пользователя страница 4

3. GUARANTEE

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed 
to be free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor 
or contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England. 
Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective materials or 
workmanship, repairs will be carried out free of charge. This guarantee period covering 
parts/labour is 12 months from the date of purchase except where tools are hired out when 
the guarantee period is 90 days from the date of purchase. The guarantee is extended to 24 
months for parts only. This guarantee does not apply to normal wear and tear, nor does it 
cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or 
repairs attempted or made by any personnel other than the authorised Draper warranty 
repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges 
will be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of 
its terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt 
or invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory 
rights.
Draper Tools Limited.

4

Содержание 10773





















Отзывы: