4. INTRODUCTION
4.1 SCOPE
This product has been designed for the transfer of water. It is ideally suited to the pumping out of
garden ponds and pools where water is free of debris. It
MUST NOT be used for the transfer of
fuels, antifreeze, solvents or any other non-aqueous liquids.
This product is suitable for enthusiasts and tradespersons alike. Any application other than that it
was intended for is considered misuse.
4.2 SPECIFICATION
Stock No. ................................................................................................................................. 08097
Part No. ............................................................................................................................. D20G/WP
Motor:
Rated voltage ............................................................................................................... 20V
Rated power .....................................................................................................................180W
Max. pressure ........................................................................................................................... 2.2bar
Max. grain size ...................................................................................................................... _<0.5mm
Max. flow rates and heights/depths ....................................................................................................
1. Normal pumping mode:
Max. height/depth ......................................................................................................... 22M
Max. flow rate .......................................................................................................... 2800L/h
2. ‘Eco’ pumping mode: ............................................................................................................
Max. height/depth ......................................................................................................... 15M
Max. flow rate .......................................................................................................... 2000L/h
Inlet pipe connectionØ ........................................................................................................ G1(1 1⁄4")
Moisture ingress protection rating .............................................................................................. IPX4
Weight (product only) ................................................................................................................ 2.4kg
4.3 HANDLING AND STORAGE
– Care must be taken when handling this product. Dropping this power tool could have an effect
on its accuracy and could also result in personal injury. This product is not a toy and must be
respected.
– Environmental conditions can have a detrimental effect on this product if neglected. Exposure
to damp air can gradually corrode components. If the product is unprotected from dust and
debris, components will become clogged. If not cleaned and maintained correctly or regularly,
the machine will not perform at its best.
– 5 –