CONTACTS
Draper Tools Limited, Hursley Road,
Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, U.K.
EU:
Oude Graaf 8
6002 NL Weert (NL)
Help Line: +44 (0) 23 8049 4344
Sales Desk: +44 (0) 23 8049 4333
Internet: drapertools.com
Email: [email protected]
General Enquiries: +44 (0) 23 8026 6355
Service/Warranty Repair Agent:
For aftersales servicing or warranty repairs, please contact the
Draper Tools Help Line for details of an agent in your local area.
YOUR DRAPER STOCKIST
MSPR1221
©Published by Draper Tools Limited.
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
MOTORCYCLE
SCISSOR STAND
04991
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product, passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. Following all the general safety
instructions contained in this manual will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of
the product.
While every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
2.
CONTENTS
– 3 –
2.1
TABLE OF CONTENTS
1.1
INTRODUCTION:
USER MANUAL FOR:
Motorcyc
le Scissor Stand
Stock No:
04991.
Par
t No: MCPL1.
1.2
REVISIONS:
Date first pub
lished A
ugust 2
011.
Date of revision No
vember 2021.
As our user manuals are continually updated, users should make
sure that they use the very latest version.
Downloads are a
vailab
le from:
drapertools.com/manuals
Draper Tools
Limited
Draper Tools
Limited
Hursley Road
Oude Graaf 8
Chandler’s Ford
6002 NL
Eastleigh
WEER
T
Hampshire
Netherlands
SO53 1YF
UK
Website:
drapertools.com
Product Help Line:
+44 (0) 23 8049 4344
General Fax:
+44 (0) 23 8026 0784
1.3
UNDERSTANDING
THIS MANUAL
’S SAFETY CONTENT:
Warning!
– Information that draws attention to the risk of injury or death.
Important
– Information that draws attention to the risk of damage to the product or surroundings.
1.4
COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal and educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other form or
means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
1.
TITLE PAGE
– 2 –
1.
TITLE PAGE
1.1
INTRODUCTION ..........................................................................................................
2
1.2
REVISIONS ..................................................................................................................
2
1.3
UNDERSTANDING
THIS MANUAL’S SAFETY
CONTENT .........................................
2
1.4
COPYRIGHT © NOTICE
..............................................................................................
2
2.
CONTENTS
2.1
TABLE OF CONTENTS
...............................................................................................
3
3.
WARRANTY
3.1
WARRANTY
.................................................................................................................
4
4.
INTRODUCTION
4.1
SCOPE .........................................................................................................................
5
4.2
SPECIFICATION
..........................................................................................................
5
4.3
HANDLING AND ST
ORAGE ........................................................................................
5
5.
HEALTH AND SAFETY INFORMA
TION
5.1
GENERAL SAFETY
INSTRUCTIONS .........................................................................
6
5.2
RESIDUAL RISK
..........................................................................................................
6
6.
TECHNICAL DESCRIPTION
6.1
IDENTIFICATION
.........................................................................................................
7
7.
UNPACKING AND CHECKING
7.1
PACKAGING
................................................................................................................
8
8.
OPERATING INSTR
UCTIONS
8.1
OPERATION AND
USE ...............................................................................................
9
9.
MAINTENANCE
9.1
MAINTENANCE .........................................................................................................
10
10. DISPOSAL
10.1
DISPOSAL .................................................................................................................
11
11. EXPLANA
TION OF SYMBOLS
11.1
EXPLANATION OF SYMBOLS
..................................................................................
12
3. WARRANTY
– 4 –
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor
or contact:
Draper Tools Limited, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, England.
Telephone Sales Desk: +44 (0) 23 8049 4333 or Product Help Line +44 (0) 23 8049 4344.
A proof of purchase
must be provided with the tool.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering parts and labour is
12 months from the date of purchase, except where tools are hired out when the warranty period
is 90 days from the date of purchase. This warranty does not apply to any consumable parts, any
type of battery or normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms
are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
4. INTRODUCTION
4.1 SCOPE
Motorcycle Scissor Stand stand suitable for use on the floor or on a motorcycle lift.
4.2 SPECIFICATION
Stock No. ................................................................................................................................ 04991
Part No. ................................................................................................................................ MCPL1
Capacity .................................................................................................................................. 450kg
Safe Working Load ................................................................................................................. 450kg
Minimum Height ...................................................................................................................... 85mm
Maximum Height ................................................................................................................... 340mm
Platform Size .............................................................................................................. 380 x 230mm
Base Size ................................................................................................................... 380 x 230mm
Nett Weight ...........................................................................................................................11.50kg
4.3 HANDLING AND STORAGE
− Care must be taken when handling this product.
• This product is not a toy and must be respected.
− Environmental conditions can have a detrimental effect on this product if neglected.
• Exposure to damp air can gradually corrode components.
• If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
– 5 –
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS
−
Warning! Before use, ensure that the motorcycle to be supported has a suitable structure and
centre of gravity to accommodate the platform without damaging the motorcycle.
Do not use if
the stand will foul on the exhaust or other vulnerable parts.
− Place the stand in a suitable work area. Keep the area clean and tidy and free from unrelated
materials and ensure that there is adequate lighting. Ensure that the floor is level and strong
enough (preferably concrete) to take the weight of the stand and the bike.
Do not operate the
stand on tarmacadam as the surface may be unstable.
− Keep the stand clean for best and safest performance.
− The maximum bike weight is 450kg.
Do not exceed this rated capacity.
− Before lifting, check that there are no overhead obstructions.
− Keep children and unauthorised persons away from the work area.
−
Do not use the stand for a task it is not designed to perform.
−
Do not operate the stand if damaged.
−
Do not exceed the rated capacity of the stand.
−
Do not allow untrained persons to operate the stand.
−
Do not make any modifications to the stand.
− Before lowering the stand, ensure that there are no obstructions underneath the motorcycle
and that all persons are standing clear.
− Before storing, ensure that all parts are clean and free of grease and oil and the stand is fully
lowered. Store stand in a safe area.
−
Warning! The instructions referred to in this manual are unable to cover all possible situations
that may occur. It must be understood that common sense and caution are factors which are
unable to build into this product, but must be applied by the operator.
5.2 RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our tools contain extensive
instructions for safe working with lifting equipment, every machine involves a certain residual risk
which can not be completely excluded by safety mechanisms. Lifting equipment must therefore
always be operated with caution!
– 6 –
6. TECHNICAL DESCRIPTION
– 7 –
6.1 IDENTIFICATION
(1)
(2)
(1)
Lift table.
(2)
Base foot.
