Draper 04745 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 20

Draper 04745 Скачать руководство пользователя страница 14

8. Operating Instructions

8.7 Automatic Power Cut-Outs

The heater is equipped with three features that will

automatically initiate standby mode under specific

circumstances:

Feature

Shutdown conditions

Shutdown timer The heater enters standby mode

when the timer reaches 00:00 once

initiated.

Tilt switch

The heater enters standby mode if

the unit is tilted either forward or

backward by an angle of 25° or

greater in order to protect the

ground from heat damage.

Open window

detection

If the ambient temperature drops

more than 5°C within 10 minutes, the

heater beeps three times and

automatically enters standby mode

in order to save energy when eternal

forces are impacting on the

temperature.

In all cases, if the heater enters standby mode

automatically, the following settings are impacted:
• The target temperature is reset to the default value.

• The shutdown timer value is retained.

• The current timer value is retained.
Press the standby button to switch the heater back on.

– 14 –

«
...
12
13
14
15
16
...
»

Содержание 04745





















Отзывы:

Нет отзывов