Draper 04742, Руководство пользователя

Страница: 7 / 16

5. Health and Safety Information
•
DO NOT use this heater with a programmer, timer,
separate remote-control system or any other device
that switches the heater on automatically as it may be
covered or positioned incorrectly when activated and
pose a fire risk.
• NEVER cover any part of the heater as this may cause
the heater to overheat or the covering item to ignite or
burn.
• NEVER insert foreign objects through the grilles.
• DO NOT operate the heater without both of the grilles
installed.
WARNING! Risk of shock!
−
DO NOT allow the heater to come into contact
with water or any other liquid.
− DO NOT use this heater in the vicinity of a bath,
shower, swimming pool or other body of water.
− DO NOT touch the heater with wet hands.
WARNING! Some parts of the product become very
hot during use and may cause burns. The heating
element DOES NOT glow when heated.
−
DO NOT touch any metal part of the heater other
than the handle or wheels during or immediately
after use.
−
ALWAYS switch off the heater, disconnect it from
the power supply and allow it to cool for at least
20 minutes before attempting to move or
reposition it.
− Particular attention
MUST be given when children
and vulnerable people are present.
5.2 Connection to the Power Supply
This appliance is supplied with an approved plug and
cable for your safety. The value of the fuse fitted is
marked on the pin face of the plug. Should the fuse need
replacing, ensure the substitute is of the correct rating,
approved to BS 1363/A and ASTA or BS Kite marked.
ASTA
BSI
The fuse can be replaced by removing the cover of the
plug using a cross-headed screwdriver and removing the
broken fuse from its holder. This should only be
performed by suitably qualified personnel.
If the power supply cord is damaged, it must be replaced
by Draper Tools, an authorised service agent or similarly
qualified personnel in order to avoid a hazard.
– 7 –
EN
The damaged or incomplete plug, when cut from the
cable, shall be disabled to prevent connection to a live
electrical outlet.
This product is Class I
†
and is designed for connection to
a power supply matching that detailed on the rating label
and compatible with the plug fitted.
CAUTION! DO NOT use this product with an
extension lead or multi-socket.
†
Earthed: This product requires an earth connection to
protect against electric shock from accessible
conductive parts in the event of a failure of the basic
insulation.