Dranetz PR150/SP1B, Инструкция пользователя

Страница: 11 / 17

10
BATTERY SUPPLY
The PR150/SP2B, and PR1500/SP8B current probes are supplied with a
9V battery and will operate on battery power typically for approximately
75 hours of continuous operation.
EXTERNAL SUPPLY
The PR 150/SP1B and PR 1500/SP7B current probes require an
external 9V power supply and each probe can be powered by a separate
adapter or by one adapter and an optional RR/PS/4A adapter cable
which allows the connection of 4 PR series probes to a single 9VDC
source . Recommended AC adapter details are as follows.
Product Number
Input
Voltage
Input
Plug Type Output
PR9VUA 100-240 VAC,
50/60 Hz
US, Euro,
UK,
Australia
+9VDC, 1.11 A
If using other AC adapters not listed above, the probe is to be externally
powered by an applicable agency Listed Limited Power supply only.
The DC input jack on the side of the probe enclosure accommodates a
2.1 x 5.5 mm barrel connector using the center pin as the positive
terminal and the outside barrel connection as the negative terminal.
It is recommended that each probe to be powered by one adapter to
power each probe if using non-Dranetz accessories.
Note: Use of non-Dranetz accessories may be susceptible to
noise influencing current measurements and use of one adapter
to power 4 probes is not recommended. Each probe should be
powered by a separate adapter.
( - terminal)
( + terminal)