Draminski GMS, Инструкция по эксплуатации

Страница: 45 / 48

44 SECTION 12 | FINAL NOTES
– after each measurements clean the measuring
chamber fast and carefully (especially if the sample
was wet), it will help your device work properly and
for a long time,
– protect your grain moisture meter against direct
exposure to water. Avoid operating the device in
extreme temperatures. Do not allow moisture con-
densing out of the air to accumulate on metal parts
of the device, as it may affect measurements,
– at the end of the season, clean and dry the measur-
ing chamber carefully. Leaving the device dry guar-
antees long and reliable operation,
– store the device in dry and warm conditions,
– before any prolonged storage, remove batteries
from their compartment in order to eliminate the
risk of damage caused by battery leak. We recom-
mend using batteries of leading manufacturers,
– in case of any problems with the device or difficul-
ties in interpretation of the results, please contact
the manufacturer DRAMIŃSKI S.A. or your local au-
thorised distributor before sending the device for
repair.
– do not dismantle the device on your own. Any
modifications or repairs performed by unauthor-
ised persons are unacceptable, as they may result
in permanent damage and void the warranty,
– always check if the mini-USB port rubber cap is in
place, otherwise dirt might get inside and cause
damage.