Memory Functions, continued 21
Receiver ‘B’:
Setup Mode #27 - set for ‘2’, and
Setup Mode #40 - Selects list #0. Construct the list with a
maximum of 10 channels. From Setup #40, index from 0-9
with the
/
buttons, Press
NUM
*
followed by a 2-
digit numeric entry for each desired memory channel.
LOCKING A MEMORY CHANNEL
Memory channels tagged with the
symbol will be
skipped during the scan process.
First be sure the receiver is in the VFO mode (MEM or
SCAN not displayed).
A)
Press
3
MEM
and select the desired memory location
with the
/
buttons, or by direct entry of a two-
digit memory channel number.
B)
To lock out a memory channel: Press
0
LOCK
. The
symbol lights adjacent to the memory channel number.
To unlock a memory channel, Press
0
LOCK
. The
symbol
will extinguish.
List index 0 - 9
with
Enter a 2-digit memory
number, or press
NUM
*
to
clear the entry.
SETUP
NUM
SETUP
RESTORE FACTORY MEMORY PROGRAMMING
With power off, press and hold the
3
MEM
button
while switching the power to ‘On’. This action does
the following:
- initializes all 400 memory channels, including
standard repeater and packet frequencies in
transceiver ‘A’.
- clears all DTMF phone numbers.
- initializes all power-on variables.
- initializes priority channels.
- disables MARS/CAP operation.