3
937.746.4556 |
www.rldrake.com
The
serial number
indicates serial number of PEG PLUS encoder
The
hardware version
indicates the hardware version of the PEG PLUS encoder
Indicates the
software version
of the unit
Indicates user-defined unit constants (
Name and Location
)
The
Up-Time
of the unit expressed in days, hours, minutes, and seconds.
To set system time you will need to set the IP address of your local DNS server by configuring DNS Mode to
“manual” under the DNS settings in the System Configuration tab. The encoder will then resolve the standard NTP
server pool DNS entry and sync the system time.
Input Status Box:
Video Lock:
Indicates if the video is present and locked
Resolution:
Indicates the resolution of the source video. The PEG encoder supports resolutions of:
480i
(640x480/720x480 @ 30FPS)
720p
(1280x720 @ 60FPS)
1080i
(1920x1080 @ 30FPS)
Embedded Audio:
Indicates if there is embedded audio on the stream
1
2
3
4
Status Tab
The status tab provides the following information (View only):
5
6
1
2
3
5
6
4