DRAKE DSE 2 PLUS, Инструкция по эксплуатации

Страница: 7 / 20

DSE 2 PLUS | 7
Instruction Manual
Rear Panel Connections
All connections are made on the rear panel.
R1 - RF Output – This type “F” connector is a
high level (+29.5 dBmV to +45 dBmV), agile 5 to
1002 MHz, multiplexed output from the DSE2
Plus RF output section.
R2 – DC Power Connector – This connector
provides the means for connection to the 5 VDC
output of the supplied external power supply.
R3 – Component Input 2 - These three color
coded RCA connectors, Cr (red), Cb (blue), and Y
(green), provide the means to input component
video. To input composite video, use the green
‘Y’ connector
.
R4 – VGA Input 2 - This VGA type connector
provides the means to input VGA video from a
computer or other device with VGA output.
R5 – HDMI Input 2 - This connector provides
the means to input HDMI video (without HDCP)
with optional embedded audio.
R6 – Audio Input 2 - These two color coded RCA
vtype connectors provide baseband audio Left
(white) and Right (red) inputs to the DSE2 Plus.
R7 – Closed Caption Input 2 - This connector
provides the means to input closed captioning.
It requires analog composite video that contains
closed captioning.
R8 – VGA Loop Output 2 - This connector
provides VGA video output to a monitor or
other equipment requiring VGA input. It is only
active when VGA is input on R4.
R9 – Component Input 1 - These three color
coded RCA connectors, Cr (red), Cb (blue), and Y
(green), provide the means to input component
video. To input composite video, use the green
‘Y’ connector.
R10 – VGA Input 1 - This VGA type connector
provides the means to input VGA video from a
computer or other device with VGA output.
R11 – HDMI Input 1 - This connector provides
the means to input HDMI video (without HDCP)
with optional embedded audio.
R6 R7 R8 R12 R13 R14
R1 R2
R3
R4 R5 R9 R10 R11 R15 R16 R17