DRAKE 1002606, Инструкция по эксплуатации

Страница: 9 / 32

9
937.746.4556 |
www.rldrake.com
Unpacking
You will find the following items in the box:
• PEG Encoder Unit (QTY = 1)
• Power Adapter (QTY = 1)
Installation
The PEG Encoder is designed to be mounted on a desk-top or table-top in the close proximity to a 120 VAC – 60 HZ
power plug.
A 1RU (1.75”) open space must be provided above the PEG encoders when mounted in a 19 inch rack or cabinet to
allow air flow for encoder heat dissipation. Drake’s PEG-RP-3/PEG-RK-KIT accessories or a standard 19” rack shelf can
be used for mounting 3 encoder modules in 1RU. See image below.
Power-Up
Plug the Power Adapter into a power plug (120 VAC – 60 HZ). Plug the power pin into the back of the PEG unit at the
input marked “DC Power”.
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
PEG-NE24-IP
POWER
IP
RESET OUTPUT ENCODING
DRAKE
D I G I T A L
PEG RACK ELEVATION DRAWING
FRONT VIEW
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
PEG-NE24-IP
POWER
IP
RESET OUTPUT ENCODING
DRAKE
D I G I T A L
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
POWER
IP
RESET OUTPUT ENCODING
10/100
INPUT
CONTROL
PEG-NE24-IP
POWER
IP
RESET OUTPUT ENCODING
DRAKE
D I G I T A L
For safe and reliable operation, only use the power adapter supplied with the PEG Encoder.
For safe and reliable operation, do not place objects within 1 inch of the unit that block airflow.
Installation & Power-Up