DragonSaw DRS-2022H10, Инструкция по безопасности и эксплуатации

Страница: 4 / 10

Warning
Keep loose or torn clothing or body parts away from any moving parts. Serious injury or
death may result.
Plan you cutting operation before starting to prevent any injury or death by a n unsecured or
falling part of the cut material or the binding of the blade cause by an unsecure part being
cut.
Have a person trained and qualified in the detection of electrical power location inspect for
live wires, live cables or pipes that may be near, behind or imbedded in the material being cut
de-energize before attempting to start cutting. Make sure that the tool is properly grounded
and wear the required protective equipment. Live electrical power will cause serious injury or
death.
Inspect the blade for any deformation, crack, missing parts, segments, any other unusual sign
of metal fatigue or defects.
Have the blade replace immediately before reusing with one specified by the manufacturer
for this particular saw or tool.
The blade should only be change by a trained or authorized person in the repair of the tool.
To safely operate the tool, you should be on solid ground with a firm grip on both handles of
the tool.
DO NOT operate on a slippery or uneven area
DO NOT allow anyone in front of the tool or in line with the blade while working, flying debris
or slurry may INJURE someone.
DO NOT operate without all the guards in place and in good working order
Danger
All electrically operated tools should be grounded and hook up to a ground fault protection
system.
All gasoline or petrol tools must be used in an outside environment. Never inside or confine
area. Accumulation of fumes or gases will cause serious injury or death
Be vigilant and very attentive to the work being perform and to your work area. Never
operate a tool or saw when you are tired, fatigue or stressed.
Follow all the safety recommendations.
Play it safe, your health and safety are your most important asset.