DRAGONFRAME DDMX-S2, Руководство пользователя

Страница: 4 / 5

Setup Instructions
CONNECTING THE DDMX-S2 TO YOUR COMPUTER
Install Drivers (Mac 10.8 and older , only):
Open Dragonframe and open a scene, or create a new one. Choose Install FTDI Serial Drivers from
the Help menu.
Plug USB connector directly into the computer or into a POWERED USB hub.
CONNECTING THE DDMX-S2 TO A DMX DIMMER/SWITCH PACK
If your dimmer/switch pack has a 3-pin XLR connector, use a 3-pin DMX cable to connect the DDMX-
S2 to it. Do not use a microphone cable.
If your dimmer/switch pack has a 5-pin XLR connector, use a 3-pin to 5-pin XLR cable to connect the
DDMX-S2 to it.
CONNECTING THE DDMX-S2 TO A DIGITAL INPUT
The DDMX-S2 can sense external events via its digital input. You can use this to trigger shooting or
playback in Dragonframe.
Connect an external switch or 5V logic level input to the DDMX-S2 connectors labeled GND (for
ground/earth) and IN .
CONNECTING THE DDMX-S2 TO A DIGITAL OUTPUT
The DDMX-S2 can output a logic level signal that can be active-high or active-low. For active-high
output, connect your external device to the connectors labeled
GND and HI . For active-low output,
connect your external device to the connectors labeled GND and lO.
CONNECTING THE DDMX-S2 TO A RELAY SWITCH
The DDMX-S2 has an internal relay that can be used for connecting to an external device that needs a
switch closure. Connect your external device to the two connectors labeled
RELAY .
CONFIGURING THE DDMX-S2 THROUGH DRAGONFRAME
Watch the video tutorial on DMX for an overview:
http://www.dragonframe.com/tutorials/
Read Automate Lighting with DMX in the User Guide (in the Help Menu) for complete
instructions.
Dragonframe DDMX-S2 User Guide Pg. 4