Dragonfly DFRM-NTT-100-ALR Скачать руководство пользователя страница 2

DFRM Installation Manual

Pg. 2

© 2016 Dragonfly

Important Safety Precautions and Warnings

Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

1.  Read and understand all instructions before using.
2.  Do not use this apparatus near water.
3.  Clean the screen housing only with a dry cloth. 
4.  Do not block any ventilation openings. Install according to manufacturer’s instructions. 
5.  Do not install near any heat sources such as radiators, heat registers, stoves or other 

apparatus (including amplifiers) that produce heat. 

6.  Care must be taken as burns can occur from touching hot parts.
7.  Do not operate appliance with a damaged cord or if the appliance has been dropped or 

damaged - until it has been examined by a qualified

8.  Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
9.  If an extension cord is necessary, a cord with a current rating at least equal to that of the 

appliance should be used. Cords rated for less amperage than the appliance may overheat.

10. To reduce the risk of electric shock, do not disassemble this appliance, but take it to a 

qualified serviceman when service or repair work is required. Incorrect reassembly can cause 

electric shock when the appliance is used subsequently.

11.  The use of an accessory attachment not recommended by the manufacturer may cause a risk 

of fire, electric shock, or injury to persons.

12.  SAVE THESE INSTRUCTIONS.

CAUTION

CAUTION: TO REDUCE THE RISK OF 

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER 

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

dangerous voltage within the product’s 

enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to 

persons.
The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

Before unpacking the projection screen, read the entire manual to become 

familiar with the steps involved for installation and operation. Dragonfly is not 

responsible for any damage or injury that occurs from incorrect installation or 

operation.

Содержание DFRM-NTT-100-ALR

















Отзывы: