background image

IMPORTANT SAFETY INSTRUCTIONS 

WARNING

:

 To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture 

1. Read and follow all instructions and warnings in this manual. Keep for future reference. 

2. Do not use this apparatus near water. 

3. Clean only with a dry cloth. 

4. Do not block any ventilation openings. Install according to manufacturer’s instructions. 

5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that 

produce heat. 

6. Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades - one wider than 

the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for 

your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched particularly at plug, convenience receptacles, and the point where it 

exits from the apparatus.

8. Only use attachments/accessories specified by the manufacturer.

9. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is 

used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

10. Unplug this apparatus during lightning storms or when unused for long periods of time.

11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, 

such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the 

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

12. Do not expose this equipment to dripping or splashing; ensure that no objects filled with liquids, such as vases, are placed 

on the equipment.

13.  To  completely  disconnect  this  equipment  from  the  AC  mains,  disconnect  the  power  supply  cord  plug  from  the  AC 

receptacle.

The lightning flash with arrowhead symbol within an equilateral 

triangle  is  intended  to  alert  the  user  to  the  presence  of  un-

insulated dangerous voltage within the product’s enclosure that 

may be of sufficient magnitude to constitute a risk of electric 

shock to persons. 

The exclamation point within an equilateral triangle is intended 

to  alert  the  user  to  the  presence  of  important  operating 

and  maintenance  (servicing)  instructions  in  the  literature 

accompanying the appliance. 

CAUTION

CAUTION: TO REDUCE THE RISK 

OF ELECTRICAL SHOCK, DO 

NOT REMOVE COVER. NO USER 

SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

2

CLEANING

The screen material and case should only be cleaned with water and mild soap using only a non-abrasive cloth. 

 

Do not use chemicals or abrasives as they will damage the screen material.

Содержание DFM-TAB-100









Отзывы: