Dragon Wholesaling LF750, Руководство пользователя

Страница: 22 / 48

Manual
V 1.7
Page 21 of 47
Grease Moving Parts
Periodic lubrication of moving parts will help reduce the possibility of mechanical failures.

Grease nipples and pins on the boom, dipper, outrigger and log grab if fitted as shown in
below.
Figure 11: Grease Nipples and Pins
Grease Track Tensioners

The correct tension is about 10-15mm up and down movement over the length of the track.

Avoid over-tensioning tracks. Aside from causing unnecessary wear and friction on the
drivetrain, pumping excessive pressure into the idler grease adjuster will cause the seals to
fail.
Figure 12: Track Tension
Grease nipple must be between
arrows for correct track tension.
(About 10-15mm of slack over length)