38 Finalizing
the
Installation
(for qualified installers only)
Travis Industries
4141209
100-01378
Glass Frame Removal
Warning:
The appliance must be completely cool before removing the glass.
Warning:
Do not strike or slam the glass.
Note
:
Remove the barrier before removing the glass (see previous page).
Replace barrier after replacing the glass.
You may use the included glass latch tool to unlatch the glass latch.
When done with the tool, place it on the base of the fireplace below
the concealment cover.
Open the four latches holding the glass frame in place
(start with the bottom two) - follow the directions shown to
the right.
a
Lift the glass frame up and
pull it forward to remove.
b
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions above in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should be flush with
the front of the fireplace when installed.
NOTE:
You may need to lift
the glass frame
while re-attaching.
Glass
Top of
Firebox
Latch
Catch
(on glass frame)