Dragino PAB2, Руководство пользователя

Страница: 25 / 39

5.3 How to set up /www/sd and /mnt/sd?
To use the /www/sd and /mnt/sd as the same as Arduino Yun, user can prepare a USB flash and
create directory /arduino and /arduino/www at the root of USB flash. Then input the USB flash
into the Yun Shield and it will automatically create /www/sd and /mnt/sd and link to /arduino
and /arduino/www
5.4 Arduino IDE doesn’t detect Yun Shield
Check below points if this issue happens:

The Arduino IDE version is 1.5.4 or later

Your PC and Yun Shield are in the same network.

If Yun Shield boot in advance than Arduino IDE, this may happen. So try to power off/on the
Yun Shield and check again.
5.5 Where can I find the source code of Yun Shield?
The Yun Shield source can be found at: https://github.com/dragino/linino
5.6 How to Upload, Download or Edit files in Yun Shield
Yun Shield has a built-in Linux system and support SCP protocol. User can upload, download or
edit the Linux files using SCP tools.
In windows OS, the scp tool is winscp. Install it and log into Yun Shield as below:

Host Name : Yun Shield IP address

User Name : root

Password : arduino (default)

Protocol : SCP
The log in process will alter two warning, just ignore it. After log in, a management panel will
appear. The left part of this panel is your PC’s directories and the right part shows the directories
of Yun Shield, you can upload/download files by dragging , or double click the files to modify its content.
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading