Dragino LoRaWAN LiDAR ToF, Руководство пользователя

Страница: 6 / 31

www.dragino.com
LLDS12 LoRaWAN LiDAR ToF Distance Sensor User Manual 6
/
31
2. Configure LLDS12 to connect to LoRaWAN network
2.1 How it works
The LLDS12 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to
join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA
keys in the LoRaWAN IoT server and power on the LLDS12. It will automatically join the
network via OTAA and start to send the sensor value. The default uplink interval is 20
minutes.
In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the
keys from the server, you can use AT Commands to set the keys in the LLDS12.
2.2 Quick guide to connect to LoRaWAN server (OTAA)
Following is an example for how to join the TTN v3 LoRaWAN Network . Below is the network
structure; we use the LG308 as a LoRaWAN gateway in this example.
The LG308 is already set to connected to TTN network , so what we need to now is configure
the TTN server.