Stand 02.09.2022
Seite 4 von 4
5695107
inactivity. Further data transmitted to the printer
will be ignored.
The printer can be re-activated by pressing the
mode button.
3.4 Replacing paper roll
If the paper roll needs replacing, open the paper
cup lid and remove the remaining paper.
Use only "MSI Thermo Paper" No. 5690151
Reel off a few centimeters from a new roll of pa-
per, hold approximately 5 cm of paper outside the
printer as the roll is placed into the reservoir.
close the lid by applying equal amounts of pres-
sure on each side until the lid is in locked position.
Now tear the surplus paper away.
3.5 Replace batteries
The MSI printer BTLE/IR is powered by 4 AA al-
kaline batteries. The status indicator will flash
three times repeatedly to show that the batteries
are nearly exhausted.
Open the battery cup and take out the exhausted
batteries. Insert the new alkaline batteries ensur-
ing the correct polarity positioning is followed.
Close the battery cup again.
The MSI printer BTLE/IR is specified only for alka-
line batteries. Therefore it is not allowed to use
the connection on the back of the instrument for
chargers.
4. Maintenance and service
A periodic maintenance of the MSI printer
BTLE/IR is not necessary. the proper function
may be checked by the user.
By non-correctable dysfunction send the printer to
your local Dräger Safety organization or to
Dräger MSI GmbH
Rohrstraße 32
58093 Hagen
Germany
Tel.:
+49-2331 / 9584 - 0
Fax:
+49-2331 / 9584 - 29
E-mail:
Dysfunctions are indicated by the status LED:
periodic 1x flashing
: paper out, fit new paper
periodic 2x flashing
: thermal head too hot, allow
head to cool
periodic 3x flashing
: battery cut-out, replace
batteries
5. Specification
Operating temperature:
0 °C ... + 50 °C
Storing temperature:
- 20 °C ... + 60 °C
Printing system: Thermal line head, 384 elements,
200 dpi; Stepper motor driven transport, 200 dpi
58 mm paper width
48 mm printing width
Printing speed:
5 lines per second (average)
Dimensions (L,W,H):
150 mm * 86 mm * 55 mm
Weight:
Approx. 400 g
Power supply:
4 * AA - alkaline batteries
Recommended paper:
AF50KS-E
Charge life:
Approx. 6,000 lines (18 m Paper)
