Dräger Fabius, Инструкция по эксплуатации, Страница: 2 / 232

2
Instructions for Use Fabius MRI SW 3.n
Working with These
Instructions for Use
Header Line
The header line on each page contains the title of
the chapter.
Page Body
The page body in these Instructions for Use com-
bines text and illustrations. The information is pre-
sented as sequential steps of action, giving the user
hands-on experience in learning how to use the
Fabius MRI workstation.
Left-Hand Column - the Text
The text in the left-hand column provides explana-
tions and step-by-step instructions on the practical
use of the machine.
z Bullet points indicate separate actions.
1 Where several actions are described, numbers
are used to refer to relevant details in the illus-
trations. On each page the numbering restart
with “1”.
– Dashes indicate the listing of data, options or
objects.
Right-Hand Column - the Illustrations
The illustrations provide visual reference for the
text and for locating the various parts of the equip-
ment. Elements mentioned in the text are high-
lighted. Renderings of screen displays guide the
user and provide a way to reconfirm actions per-
formed.
Typing Conventions in this Manual
– User controls, such as hard keys and soft keys,
and screen pages are printed in bold within quo-
tation marks, e.g., »
PEEP « or » Volume Set-
tings «
– Screen messages are printed in bold within
quotation marks, e.g., » Flow Calibration in
progress «
– Alarm messages are printed in bold within quo-
tation marks, including the exclamation marks
that indicate their alarm urgency level, e.g.,
»
APNEA PRESSURE!!! «
305
Configuration
124 Instructions for Use Fabius MRI SW 3.n
Configuration Functions in Standby
Mode
The configuration functions available in Standby
include calibrations, system tests, and the manage-
ment of default settings.
To access Standby mode:
1 Press the » Standby « key.
z
The waveform window is replaced by a confir-
mation message and the instruction to shut off
flow.
The LED on the Standby key starts blinking and will
remain blinking until Standby is confirmed.
z
Confirm the mode change. The ventilator enters
Standby mode, the Standby screen replaces the
previous screen, and the Standby LED stops
blinking and remains on.
The following soft key labels appear at the bot-
tom of the Standby screen:
– »
Run System Test
«
– » Calibrate Flow Sensor «
– » Calibrate O2 Sensor «
– » Leak / Compl Test «
– » Access Alarm Log «
– » Restore Site Defaults «
NOTE:
If confirmation does not occur within 15 seconds,
the ventilator remains in the previous mode and the
waveform window is restored.
56
6
1
52
2
50
1