Dräger Evita 2 Dura Скачать руководство пользователя страница 62

Страница: 62 / 140

Operation

Special Functions

Connect the nebuliser hose to the port on the front panel of
the Evita 2 dura.

●

Fill the medicament nebuliser in accordance with its
specific Instructions for Use.

Hold down key »

« until the yellow LED lights up.

●

Advisory message on the screen:
»

Nebuliser on!

The nebuliser remains in operation for 30 minutes.

If you wish to interrupt medicament nebulisation before it is
complete:

Press »

« again. The yellow LED goes out, the

nebuliser will be switched off.

The ﬂow sensor is subsequently cleaned and calibrated
automatically.

●

Remove residual medicament. Strictly follow the
Instructions for Use of the medicament nebuliser.

Warning: the effect of aerosols on sensors, ﬁlters and
heat and moisture exchangers (HME) must be taken into
account!

The measuring function of the ﬂow sensor may be impaired.
The ﬂow resistance of ﬁlters is liable to increase and may
impair ventilation.

Do not place a microbial ﬁlter on the nebuliser outlet
during nebulisation!

During medicament nebulisation, do not use a heat and
moisture exchanger (HME) at the Y-piece. Risk of
increased breathing resistance!

036

Evita 2 dura

Содержание Evita 2 Dura













































































































































Результаты поиска

Содержание Evita 2 Dura

Отзывы:

Dräger Evita 2 Dura, Инструкция по эксплуатации, Страница: 62 / 140

Результаты поиска

Содержание Evita 2 Dura

Отзывы: