8
•
After two seconds, "
WAIT
" appears on the
display.
•
After six seconds, "
READY
" appears on
the display and a short acoustic signal
sounds. Simultaneously, the current test
number is displayed. The green lamp
flashes. The device is ready to start the
measurement.
Performing the Measurement
•
The test subject must breathe evenly and continuously into the
mouthpiece. A continuous tone sounds and the green lamp flashes
when a sufficient breathing flow volume has been reached.
"
Blow
" appears on the display while the breath
sample is taken.
After delivering a sufficient breath sample, the
green lamp goes out and the continuous tone
falls silent.
"
WAIT Analyzing
" appears on the display.
Test Result
After 5 to 25 seconds (depending on the device
temperature and the measured concentration),
the measuring result appears on the display.
Errors during Breath Sample Delivery
If the breath sample volume is insufficient,
"
Insufficient Volume
" appears on the display.
A horn sounds briefly and the red lamp
flashes.
01233082_01_en.eps
WAIT
01333082_01_en.eps
READY
Test No. 00140
01433082_01_en.eps
Blow
01533082_01_en.eps
Analyzing
WAIT
‰
0.00
01633082_01_de.eps
01733082_01_en.eps
OK
Volume
Insufficient
