Installation of BSHPS (Fabius Tiro)
Fabius GS/Tiro Supplement
11
Figure 7. BSHPS Installation on Wall Mounted Machine -
Step 1
Wall Mounted Machine BSHPS
Installation
1. Remove the GCX slide plate (
1
in
Figure 7
) from
the side of the power supply by removing the two
screws (
2
in
Figure 7
).
Figure 8. BSHPS Installation on Wall Mounted Machine -
Step 2
2. Install the Dräger clamp onto the rear side of the
power supply box using the two screws and
lockwashers included with the clamp assembly
(
Figure 8
).
Figure 9. BSHPS Installation on Wall Mounted Machine -
Step 3
3. Clamp the power supply onto the rear area of the
left hand Dräger rail (
1
in
Figure 9
).
1
2
1
