4.
UK - Product information
This original installation instruction contains no construction documentation.
Remember to register your Draftbooster online
www.draftbooster.co.uk/registration.
The following symbols are used in the instructions to draw attention to the risk of danger or damage to the product.
Prohibited symbol
Failure to observe instructions marked with the prohibited symbol may result in
extreme danger.
Danger symbol
Failure to observe instructions marked with the prohibited symbol is associated
with the risk of injury or material damage.
Disposal
No special precautions. The product should be discarded in accordance with national
regulation for disposal of electronic waste.
4.1
Package contents
1 pc. Draftbooster (DB7).
1 pc. wireless outlet with remote control and battery.
1 pc. adaptor (only DK).
1 pc. assemble kit.
1 pc. installation and operation instruction for the Draftbooster.
1 pc. installation and operation instruction for the remote control.
4.2
Function
Scope
The Draftbooster is a fan for mounting on top of the chimney. The Draftbooster is designed to
facilitate ignition and refueling. It is designed for wood burning stoves or closed inserts with a
nominal effect of maximum 8 kW. The Draftbooster comes with a flexible flange, a 5-meter cord
prepared with plug, and an integrated isolation switch.
Function
The Draftbooster has been developed to solve draught problems by creating a mechanical draught
on chimneys with circular core and a maximum internal diameter of ø220 mm. The Draftbooster is
designed to withstand high temperatures associated with wood burning at a max. temperature of
250 °C and tolerates continuous operation on stoves and closed inserts.
The Draftbooster must always be on during start-up (lighting the fire) and during refueling. When
the operating temperature in the fireplace, flue and chimney has reached a reasonable level and
thus created sufficient draft, you may choose to switch off your Draftbooster. If you need extra
draw-out later, due to e.g. a change in weather, you simply turn on the Draftbooster again, leaving
it active as long as necessary.
Start/stop can be accomplished by:
- a wireless outlet (included)
- a regular outlet (possibly with switch.
Bad heating habits may result in problems, such as soot, chimney fires, etc., which may damage the
Draftbooster.
More information
www.draftbooster.co.uk
WARNING
To avoid chimney fires – the chimney must be swept before mounting the Draftbooster!
As the Draftbooster is part of a wood-fired installation, please ensure that the design meets the
requirements of fresh air supply. It is always recommend to install a smoke alarm in connection with a
wood-fired installation. Regardless of usage pattern, you must turn on your Draftbooster at least once
a month, allowing it to run for 5-10 minutes. Inspect and clean your Draftbooster installation at least
once a year. The manufacturer cannot be held responsible for water penetration into the chimney.
3120034-DB7-DK-SE-NO-UK-DE
30
•
UK
