DRACAST LED500 STUDIO 5600K, Инструкция по эксплуатации

Страница: 3 / 5

OPERATING INSTRUCTIONS
Powering the light
The Dracast Studio Series LED500 has one power option to choose from.
- A/C Power - Plug the power supply (included) into the XLR port on the back
of your LED500. Press the power switch to “ON”
Understanding the Controls
Your Dracast Studio Series is equipped with full DMX 512 remote functional-
ity. The dimming and color controls (if available) can be controlled either via a
standard DMX controller or locally by using the control knobs
on the back of the fixture.
The control panel has an Digital display and four buttons directly below it.
These four buttons perform the following actions.
SETUP - Cycles through each adjustable option. (Currently selected menu item
flahes.)
UP - Adjusts the selected item up.
DOWN - Adjusts the selected item down.
ENTER - Confirms the current selection.
PHOTOMETRIC DATA
LED500 STUDIO 5600K
DRS-LED500-DX
3 ft / 0.9 m 6 ft / 1.8 m 9 ft / 2.7 m 12 ft / 3.6 m
511 fc
5500 lux
144 fc
1550 lux
53 fc
725 lux
40 fc
430 lux
LED500 STUDIO 3200K
DRS-LED500-TX
353 fc
3800 lux
107 fc
1150 lux
49 fc
530 lux
28 fc
300 lux
LED500 STUDIO
3200K - 5600K
DRS-LED500-BX
251 fc @ 3200K
409 fc @ 4400K
181 fc @ 5600K
2700 lux @ 3200K
4400 lux @ 4400K
1950 lux @ 5600K
70 fc @ 3200K
116 fc @ 4400K
49 fc @ 5600K
750 lux @ 3200K
1250 lux @ 4400K
530 lux @ 5600K
33 fc @ 3200K
56 fc @ 4400K
25 fc @ 5600K
350 lux @ 3200K
600 lux @ 4400K
265 lux @ 5600K
19 fc @ 3200K
33 fc @ 4400K
14 fc @ 5600K
200 lux @ 3200K
350 lux @ 4400K
150 lux @ 5600K