CONTACT US AT
www.DRpower.com
5
III: Pre-Operation Inspection
1. ENGINE OIL
Use 4-stroke engine oil, API service classification
SJ
class or equivalent. Check
the API service label on the oil container to be sure it includes the letters
SJ
class or equivalent.
SAE 10W-30 is recommended for general use. Other viscosities shown in the
chart may be used when the average temperature in your area is within the
indicated range.
Oil level check
1.
Remove the dipstick and clean it with a rag.
2.
Reinsert the dipstick into the oil filling hole without screwing it in. Pull the
dipstick out and check oil level.
3.
If the oil level is too low, add the recommended engine oil up to the oil upper
limit.
4.
Reinstall the dipstick.
Oil Capacity = 37 oz (1.1 L)
2. AIR CLEANER
Remove the air cleaner cover and check the air filter to make sure it is clean and
not damaged. Clean or replace it as necessary (see the “Maintenance” section
for maintenance of the air filter).
Air Cleaner
Case Body
Air Filter
Foam
Element
Air Filter
Cover
Captive
Fasteners
Tabs
Tab
Cutouts
Oil Dipstick
Oil Upper
Limit
Oil Lower
Limit
Running the engine with insufficient engine oil may damage the engine
severely and would not be covered under warranty.
Never run the engine without the air filter and cover installed or damage to the
engine could result. Damage to the engine by not having the air filter and cover
installed is not covered under warranty.
Environment Temperature
SAE
Viscosity
Grades
