DR Power Grader Скачать руководство пользователя страница 31

CONTACT US AT 

www.DRpower.com

          31

 

 

DR

®

 

POWER GRADER 

2-Year Limited Warranty 

Terms and Conditions 

The DR

 POWER GRADER is warranted for two (2) years against defects in materials or workmanship when put to 

ordinary and normal consumer use; ninety (90) days for any other use. 

For the purposes of all the above warranties, “ordinary and normal consumer use” refers to non-commercial 
residential use and does not include misuse, accidents or damage due to inadequate maintenance. 

DR Power Equipment certifies that the DR

 POWER GRADER is fit for ordinary purposes for which a product of this 

type is used. DR Power Equipment however, limits the implied warranties of merchantability and fitness in duration 
to a period of two (2) years in consumer use, ninety (90) days for any other use.

 

The 2-Year Limited Warranty on the DR

 POWER GRADER starts on the date the machine ships from our factory. The 

2-Year Limited Warranty is applicable only to the original owner. 

The warranty holder is responsible for the performance of the required maintenance as defined by the manufacturer's 
owner's manuals. The warranty holder is responsible for replacement of normally wearing parts such as the Scarifying 
Teeth, Mold Board and Shear Bolt. Accessories to the machine are not covered by this warranty. 

During the warranty period, the warranty holder is responsible for the machine transportation charges, if required. 
During the warranty period, warranty parts will be shipped by standard method at no charge to the warranty holder. 
Expedited shipping of warranty parts is the responsibility of the warranty holder. 

SOME STATES DO NOT ALLOW LIMITATIONS ON THE LENGTH OF IMPLIED WARRANTIES, SO THE ABOVE 
LIMITATIONS MAY NOT APPLY TO YOU.

 

DR Power Equipment shall not be liable under any circumstances for any incidental or consequential damages or 
expenses of any kind, including, but not limited to, cost of equipment rentals, loss of profit, or cost of hiring services 
to perform tasks normally performed by the DR

 POWER GRADER. 

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU ALSO HAVE OTHER RIGHTS, WHICH VARY 
FROM STATE TO STATE.

 

Содержание Power Grader

































Отзывы: