Massage chair
Massage chair
Method of usage
Method of usage
Floor Protection
Zipper
Put the heavy massage chairs on the wood floor for a longtime may damage the floor,
so please place a carpet or other object to avoid this damage.
Instruction manual
Instruction manual
5.As figure, the hook on the arm rest respond to the box on the fix board, the steel
board respond to the groove of arm rest.(figure 5)
6.Hold the arm rest with your hands, the back armrest is higher than the front, front
armrest pin respond to box on the front part of the steel board , ( check the connect
wire if it is inserted in to the bottom of armrest frame, avoid to get stuck), back armrest
pin respond to box on bottom part of the steel board in turn, press down the back part
of armrest to fixed two armrest top pin on the steel board. (figure 6)
figure 5
figure 6
Bottom
armrest pin
Front armrest pin
Armrest top
pin -- 2 unit
Note: the connect wire must be
insert into the right place, avoid to get stuck.
7.Mount the arm rest to chair frame, the mounts for the arm should slide into their
respective locations on the frame of the chair without applying force, press down slightly
on the arm to lock into place. then press the armrest make sure the pin into the box on
the fixed steel board, and pull it with your hand to check it is fasten tightly.(figure 7)
8.Find out the install hole on the front part of the fixed steel board, screw the screws with
hex wrench.( Figure 8) .
9.Find out the install hole on the behind part of the fixed steel board, screw the screws with
hex wrench, finish the installation, same installation of the two armrest. (figure 9) .
figure 7
figure 8
figure 9
P
re
s
s
D
o
w
n
w
a
rd
S
lig
h
tly
Armrest
Seat cushion
Calf rest
Figure: hex head screw
fixed in front part of armrest
Back cover
Armrest
figure: hex head screw fixed in back part of armrest
The disassemble and using of pillow pad and back cushion
Do not move the chair with its wheels on wood floor, rough ground or in a
narrow space. Two people are required to lift the chair in this case, carry the
calf front sealing plate and back cover ( please don't lift the armrest ) .
NOTED
AB flannelette
Belt
Figure 1
Figure 2
Figure 3
Turn head
cushion down
Using head cushion can reduce knead massage strength for neck and shoulder, it
all depends on you whether to use it (we suggest you using it). Head cushion and
backrest are connection through a zipper (figure 1), upturn the back side of the
head cushion, and put the AB flannelette inside of the head cushion insert the belt
above the backrest (figure 2). Turn down the head cushion, put the back side lay on
the backrest. It can adjust to a suitable position based on different size(figure 3).