Dr.Prepare DPS-500-01-US, Руководство пользователя

Страница: 8 / 16

EN-07
charge status and the number under INPUT shows the real-time charging power. Once
it is fully charged, all battery segments will be lit and remain solid.
！
Note: If the product malfunctions, error codes would be displayed on screen.
3. Charging Instructions
！
Note:
Please charge the product to 100% before using.
When charging the product, the battery capacity display icon on LCD screen will be on
dynamic status, after the battery is charged fully, the display icon will on static status.
How to charge this product
●Solar Panel charge the product
(1)Chose suitable solar panel (DC14~40V/120W)
(2)Put the solar panel under strong sunshine, face to the sun positively.
(3)Take the part MC4 cable, connect the solar panel and the product.
(4)When the product is charged fully by the Solar, it will stop charging automatically.
Please take out the charging cable, and turn off the product.
！
Note:
Please make sure the cable connecting is correct and stable, or will cause
the connector in high temperature status or sparking
.
！
Note:
Please charge the product under 0~40
℃
temperature environment.
！
Note: During the charging, it is normal situation if the product is getting a little bit
hot.
！
Note:
The charging time is different when light intensity is different.
！
Note:
Make sure that the positive and negative poles of solar panels are connected
correctly. Refer to the following connection chart.
Solar panel PV+
Solar panelPV-
Connecting cable PV+
Connecting cable PV-
●AC charger charge the product
！
Note: Always use the standard AC charger that comes with the product.