6
Fig. 6
13
Ã
Installing the tanning elements
preassembled in steps 2 and 3
Installation of the right element
Lift the element and place it in the tongues provided
(13 + 1) in the baseplate (Figs. 6 and 7).
Note!
The element will need to be held in place by one
person.
Fig. 7
1
13
Installation of the left element
Lift the element and place the lower right side on the
installation plate of the stand foot (7) (Fig. 8).
Fig. 8
7
6
5
Now lift the stand foot (8) on the lower left side into the
positioning tongue (14) in the baseplate (Fig. 9).
The current assembly condition is shown in Fig. 10.
Fig. 9
Fig. 10
1
13
14
Bolting together the two elements at stand foot (7).
For this step, you will need two M10 nuts (5) and 2 lock-
washers (6) from the accessory pack (Fig. 8).
Bolting together the two elements at the top
For this step, you will need the installation plate (15), 4 nuts
(5) and 4 lock-washers (6) from the accessory pack.
M10 bolts (16) are provided in the upper sections of both
elements. Place the installation plate with its holes over
the bolts (16), and fix it firmly in place using the nuts (Fig.
11.
The two tanning elements are now assembled.
Note: Check the correct position in relation to the
baseplate and the aligned position!
Note! Both elements must be held in the upright position
until they are bolted together.
5
15
Fig. 11
6
16
16
14
14
