DPtech FW1000 Series Firewall Products User Configuration Guide
7-203
7.2.2 Access Control
To access to the access control interface, you can choose
Service > Access control > Access control
, as shown in
Figure7-8
Access control
Table7-5 describes the configuration items of access control.
Table7-5
Access control configuration items
Item
Description
Name
Configure a name for the access control rule.
Network application group
Select a name for the network application group.
Action set
Select black list or white list for the rule of access control.
Send log
Select whether to enable the send log function.
Operation
Click
copy or
delete icon to do the operations.
To create the rule of the access control, you can take the following steps:
Configure a name for the rule.
Select network application group, and select an action for the rule, select whether to enable send log function.
Click
Ok
button in the upper right corner on the webpage.
!
Caution
：
Access control is to restrict the communication between inside network and outside network, while, it can not restict
the communiation in the same network.
7.2.3 Group Management
To enter group management interface, you can choose
Service > Access control > Rate limitation > Group
management
, as shown in Figure7-9.
