DPtech FW1000 Series Firewall Products User Configuration Guide
7-199
Table7-4 describes the configuration items of the single user rate limit parameter.
Table7-4
Single user rate limit
Item
Description
NetUserGroup
Configure a name for the user group parameter.
Up
Configure the rate speed for the uplink.
Unit(bps)
Select a unit for the uplink rate limit.
Down
Configure the rate speed for the downlink.
Units(bps)
Select a unit for the downlink rate limit.
Operation
Click
copy or
delete to do the operations.
!
Caution
：
Rate limitation is to limit user’ communiation between inside network and outside, while it can’t limit the
communitcation in same network.
Rate limiation is to control the sum of the newwork bandwith of all users correspond to the rule.
Rate limitation per IP address is control the bandwidth of single user correspond to the rule.
7.1.4 Group Management
To enter group management interface, you can choose
Service > Access control > Rate limitation > Group
management
, as shown in Figure7-6.
Figure7-6
Group management
