DPtech FW1000 Series Firewall Products User Configuration Guide
4-169
4.15 Session management
Session management is mainly used for detecting translation layer data packets. Its substance is to trace the
connection status for general TCP protocol and UDP protocol through layer protocol detection, which maintain and
manage connection status uniformly.
4.15.1 Session list
To enter the session list page, you can choose
Basic> Firewall > Session Management > Session List
from
navigation tree, as shown in Figure4-36.
Figure4-36
Session management
Table4-17 describes the details of binding log query.
Table4-17
Binding log query
Item
Description
No.
Displays the sequence number of the session list.
Protocol type
Transport layer protocol type, including TCP, UDP, ICMP, ICMPv6, GRE, AH,
ESP, and Unknown protocol.
Session status
Displays session status, including new, close-wait, established, time-wait, etc.
Create time
Displays when the session is created.
TTL
Display the session time to live.
Initiator Source Address: Port->Destination
Address: Port
Displays the source port and destination port of the session initiator.
Initiator Packets/Bytes
Displays the total packet numbers send by session initiator.
