DPtech FW1000 Series Firewall Products User Configuration Guide
4-165
Table4-13
Switches table
Item
Description
Switches IP address
Specify the switches IP address.
SNMP read community
Specify community sting of the switches
Operation
Click
copy icon or
delete icon to do the operations.
4.14.3 User/IP binding
User/IP binding should be used with the web authenticate function. With username and IP address binding function
configured, an interface checks whether the username and IP addresses in packet is identical. If so, it forwards the
packet; otherwise, it discards the packet.
To enter the User/ IP binding page, you can choose
Basic> Firewall > MAC/IP binding > User/IP binding
from
navigation tree, as shown in Figure4-33.
Figure4-33
User/IP binding
Table4-14 describes the details User/IP binding.
Table4-14
User /IP binding
Item
Description
Binding mode
Manual configuration: add username and IP address through manual configuration.
Automatic learning: learn username and IP address from the switch.
No.
Displays the sequence number of the user/IP binding list.
Username
Enter manually: configure IP address manually
Existent authenticated user: select a user from the existent authentication user list.