DPtech FW1000 Series Firewall Products User Configuration Guide
4-160
4.12 Service limit
To enter the service limit page, you can choose
Basic> Firewall > Service Limit
from navigation tree, as shown in
Figure4-26
Service Limit
4.13 Blacklist
4.13.1 IPv4 black list configuration
Blacklist is an attack prevention mechanism that filters packets based on source IP address. Blacklist feature can be
easily configured and filter packets source from particular IP addresses fast.
To enter the IPv4 blacklist configuration page, you can choose
Basic> Firewall > Blacklist
from navigation tree, as
shown in Figure4-27.
Figure4-27
IPv4 blacklist configuration
Table4-8 describes the details of blacklist configuration.
Table4-8
Blacklist configuration
Item
Description
Option
Click the Enable IPv4 black list check box to enable this function.
IP address/mask
Specifies an IP address to be blacklisted.
Remaining life time
Displays the last configuration record that you can view the valid time and life
cycle.
Status
Allows you to select the status for the IPv4 blacklist configuration.
Last configuration record
Click
copy icon and
delete icon to do the operation.
