21
Edit Menu Field Descriptions
9.2
9.2.1
System
From the
Edit
>
System
menu, you will configure global DCP, and control settings.
Fig. 9.4
- The Edit > System menu
Global System Settings
Name
A name for this Remote Power Switch (AC). (Optional field)
Location
The location of this Remote Power Switch (AC). (Optional field)
Contact
Contact telephone number for the person responsible for this Remote
Power Switch (AC). (Optional field)
User
Used to change the username for logging into the unit.
Password
Used to change the password for logging into the unit (case-sensitive).
"From" Email Address
A valid email address used by the unit to send email alarm notifications.
DCP Responder Settings
(For use with T/Mon NOC)
DCP Unit ID
User-definable ID number for this Remote Power Switch (AC) (DCP
Address).
Listen DCP
Choose to listen DCP over LAN or serial. May also be disabled.
DCP LAN
Enter the DCP port for this Remote Power Switch (AC) (UDP/TCP port).
Expansions
Set to "1" to add an expansion unit. (DCP must be set to "disable listening"
when using an expansion unit.)
System Controls
Initialize Configuration
Used to restore all factory default settings to the Remote Power Switch (AC).
Do not initialize the non-volatile RAM (NVRAM) unless you want to re-enter all
of your configuration settings again.
Backup Configuration
Saves your current configuration to a .bin file
Restore Configuration
Clickable link that takes you to the Firmware Load screen, where you'll