15
Exp. Addr. #1
The DCP address of the BACTL32 “BAC2” DCP address.
Exp. Addr. #2
N/A
Dialout Port
N/A
Phone
Enter the phone number to reach the remote.
Polling Type*
Select Periodic or Schedule from the default box. Periodic polling polls at the
interval specified in minutes in the polling interval field. Schedule sets a defined
day and time in the week to poll the unit. If periodic is selected, the cursor will skip
to the Polling Interval field. If schedule is selected, the cursor will skip to the
scheduled days field.
Polling Interval*
Periodic polling only. 0 to 9999 minutes. 0 = never. The cursor will skip out of edit
mode after entering a value.
Scheduled Days*
Enter the whole number of each hour (24 hour clock) to place a polling call (0-23,
where 0 = midnight). Example: 0, 8-16 polls at midnight and every hour from 8 AM
to 4 PM.
Scheduled Minutes*
Enter the whole number of the offset from the hour each call is to be made. (0-59,
where 0 = on the hour). Example: 30 polls at half past the hour.
This procedure is also located in
section M22 of your T/MonXM User Manual.
